-40%
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION
W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION

W. M. BERG STAINLESS STEEL SPUR GEAR 64 PITCH 112 TEETH HIGH PRECISION

$ 9.5

Availability: 44 in stock
  • Gear Material: STAINLESS STEEL
  • Number Of Teeth: 112
  • Bore Diameter: 1/4"
  • Condition: These were packed in the clear plastic tubes fed onto a nylon spindle with the part number marked on the tubes. At the most these may have been opened and looked at or fiddled with but never put to use.
  • Brand: WINFRED M BERG
  • Country/Region of Manufacture: United States
  • Pitch Diameter: 1.750"
  • Model: PIN HUB STAINLESS STEEL
  • MPN: P64S26-112 Pin Hub Spur Gear
  • All returns accepted: ReturnsNotAccepted

    Description

    SAME DAY SHIPPING IF PAID BEFORE NOON EASTERN TIME
    BUY IT NOW IS FOR 1 GEAR
    AGMA GRADE 10 !
    .50 FLAT SHIPPING RATE FOR ANY QUANTITY !
    For sale are some very high precision stainless steel gears. These ARE 64 PITCH AND HAVE 112 teeth. 300 series stainless steel. These are the same gears that are used for laboratory instrumentation and avionics. These have a stainless set screw and the hubs are pre-drilled for a cross pin.
    These are new old stock still in the factory packaging.
    Please note that the clear plastic
    tubes are
    not used to mail these. These will be
    rolled in
    bubble wrap to protect the teeth from damage
    These would never be placed together so that the teeth would scratch one another.
    These are now stored with desiccant packs in our lab office in metal cabinets.
    When we log on to our account at Berg and check the stock number on these they are an incredible each !
    These gears are 64 pitch and 20° pressure angle and 1/8" FACE WIDTH.
    These gears have a quarter inch bore. Or .2495"
    Use these on your next project for smooth and quiet running gears. PLEASE NOTE THAT NONE OF THE EXTRAS OR MEASURING INSTRUMENTS ARE PART OF THE SALE.
    They
    buy it now
    is for one
    gear
    .
    If you pay before noon Eastern time these will be mailed the same day !