-40%
Bulk Glue For Making Rat Glue Traps Mouse Glue Traps Snake Glue Traps 1 Gallon
$ 30.06
- Description
- Size Guide
Description
Catchmaster Bulk Glue Can - 1 GallonThis Bulk Glue is for those who want to make their own Mouse and Rat Traps when you need a specific shape and size that isn't commercially available.
( Please do not order this item if you do not know how to use it. Making your own glue boards does require extra time and effort )
** There are no returns on this product.
This Bulk Glue is a glue that has a new and improved formula which makes the glue easy to spread.
It will not run at high temperatures or lose its effectiveness at low temperatures.
This Glue works great on both rodents and is non-toxic, making it well suited for use in sensitive areas.
Catchmaster Bulk Glue can be applied to cardboard, plastic, roofing shingles, and wood.
The glue can be heated to make application easier. To remove the glue, use vegetable oil or baby oil, and it will come off.
Place the glue 5 to 15 feet apart, depending on the size of what you are trying to catch, keep the glue boards in place for at least five days before removing it, since the pest may avoid it until it gets accustomed to it. Use putty or wire to secure the boards in place as to prevent the pest from moving the board around.
Directions for Room Temperature Application:
1.
Wear gloves then dip both hand and scissors into soapy water to prevent glue from sticking.
2.
Pull out the desired amount of glue from container and use scissors to snip excess back into container.
3.
Place glue on plastic trays, foil, cardboard and other intended applications.
4.
Spread glue with putty knife or hands to fill trap area depth of 1/4" for rats and 1/8" for mices and insects.
Directions for Hot Application:
*USE EXTREME CAUTION WHEN HANDLING HOT GLUE SUBSTANCE. SIMILAR BEHAVIOR TO HOT OIL. USE HEAT RESISTANCE GLOVES, PROTECTIVE EYEWARE AND FACE GUARD RECOMMENDED.
1.
Open container.
2.
Place container in oven or hot plate.
3.
Heat slowly, bringing temperature to 250 F.
4.
Stir glue occasionally for 1-2 hours.
5.
Do not exceed 2 hours, burning will occur.
6.
Remove container with heat resistant gloves and place on stable surface.
7.
Apply with putty knife.
No oral advice or written information given by American Pest supplies shall create a warranty.
American Pest Supplies is a seller of various products. American Pest Supplies does not warranty the safety or the effectiveness of any of the products listed on this website. Any warranty or guarantee of safety or purpose for any particular use lies solely with the manufacturer.
Pest Control Products always have a label attached and it is here by noted that for all purposes the label is the law and according to federal law the product label must be followed and that any pesticide product must be used according to the label directions.
Any advice or recommendations given by American Pest supplies or anyone representing American Pest Supplies will never be intended to take the place of the pesticide label.The pesticide label is the law and a legal document. Always read and follow the label directions before using any pesticide product.
Some of the products sold by American Pest Supplies could require special licensing training or registration of the user in that users State, County, City, Etc. It is the sole responsibility of the purchaser and/or the end user to provide a license, permit, registration etc. If required by that purchasers local or state authorities.It is the sole responsibility of the user to verify that any products purchased are licensed for use in their State, County or City.
The customer assumes all responsibility for safe, proper and legal use of any products they purchase. The products we sell are intended for personal use only, in accordance with the customer's state laws and restrictions.
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. The Label is The Law !
This product cannot be used for any purpose that it is not labeled for!