12 x 32 or 32 x 12 Cube Core Eggcrate Return Air Grille

Description

12"w X 32"h - The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75" Width x 33.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE
SAVE MONEY ON YOUR BILL - PRESERVE YOUR HVAC UNIT - Highest Rate Of Air Flow Efficiency - Almost 95%
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
NEVER RUST - Aluminum Frame & Aluminum Cube Core
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Product Description
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint. Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
No Sharp Surface Edges.
Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Quiet Airflow that Saves you Money!
The Cube Core Eggcrate Return Grille is the quietest, and cheapest way to run your HVAC System with a 95% Airflow Rate of Efficiency. Due to almost no resistance in its core, you get the most out of your HVAC system, providing your home with plenty of airflow which saves you money too! The easier it is for the air to flow, the less energy your HVAC system uses.
Fits Snugly into your HVAC Air Duct
With the Cube Core Eggcrate's sturdy inner frame, you can be sure that your grille will be securely and precisely installed into your air duct hole.
Material
Aluminum
Installation Method
Sidewall, Ceiling
Included Components
Screws
Manufacturer
HVAC Premium
Why Cubic Core Eggcrate?
Cubic Core Eggcrate design has the highest rate of air flow efficiency - almost 95% - thereby saving you money on your electric bill, and preserving the lifetime quality of your HVAC machine. And as an added plus, you get a much quieter HVAC system, as the air does not have to force itself through. And if that's not enough, you can bet on the impressions it will make on your house visitors, as this has an upscale luxury look to it.
Why Aluminum?
Aluminum will
Never Rust
, and will last you a lifetime.
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
How To Measure A Grille Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint. Total outer size of this grille is; listed size +1.75.
On this model of Cubic Core Eggcrate design, it will look the same either direction, so feel free to order it any way it goes. For Example: You can use a 14" x 20" as a 20" x 14", and it will all look the same.